All Obstacles During HPE0-V26 Exam Preparation with HPE0-V26 Real Test Questions
Fully Updated Free Actual HP HPE0-V26 Exam Questions
HP HPE0-V26 (Delta - HPE Hybrid Cloud Solutions) Exam is a valuable certification test for IT professionals who want to validate their knowledge and skills in designing, implementing, and managing hybrid cloud solutions using HPE technologies. HPE0-V26 exam covers a wide range of topics and is an excellent option for IT professionals who want to stay competitive in the ever-evolving IT industry. Passing the exam and obtaining the certification can lead to higher salaries, new job opportunities, and career advancement.
HP HPE0-V26 exam focuses on a variety of topics related to hybrid cloud solutions, including HPE ProLiant Servers, HPE OneView, HPE Synergy, HPE Storage Solutions, HPE Helion CloudSystem, and more. HPE0-V26 exam consists of 40 multiple-choice questions that candidates must complete within 1 hour and 30 minutes. Upon successful completion of HPE0-V26 exam, candidates will earn the HPE ATP - Hybrid IT Solutions V3 certification, which is a valuable credential that demonstrates their ability to design, deploy, and manage hybrid cloud solutions using HPE technologies.
NEW QUESTION # 12
An HPE ProLiant DL380 Gen10 Plus server had a power supply issue, and it failed to alert the customer and create a case With HPE support.
What additional step is required to activate this feature?
- A. Add the server to the existing ILO 5 Federation
- B. Connect the server to an HPE Remote Support Host Server
- C. Enable the Remote Console within iLO 5
- D. Apply the ILO 5 Advanced License
Answer: B
Explanation:
Explanation
This is because HPE Remote Support is a service that provides proactive and reactive support for HPE servers, storage, and networking products. It enables automatic fault detection and diagnosis, remote troubleshooting, and case creation and management. To use this service, the server must be connected to an HPE Remote Support Host Server, which is a server that runs the HPE Remote Support software and communicates with the HPE Support Center
NEW QUESTION # 13
Match the RAID level to the number of drive failures an array can handle without losing data. (Each option may be used once, more than once, or not at all.)
Answer:
Explanation:
* RAID 1: any single drive
* RAID 1 ADM: any two drives
* RAID 5: any single drive
* RAID 6: any two drives
* RAID 1: This is a level of RAID that uses mirroring to create an exact copy of data on two or more disks. It can tolerate the failure of any single drive without losing data, as long as the other drive is still functional.
* RAID 1 ADM: This is a level of RAID that uses advanced data mirroring to create two copies of data on three disks. It can tolerate the failure of any two drives without losing data, as long as the third drive is still functional.
* RAID 5: This is a level of RAID that uses striping with parity to distribute data and parity information across three or more disks. It can tolerate the failure of any single drive without losing data, as long as the other drives can reconstruct the data from the parity information.
* RAID 6: This is a level of RAID that uses striping with double parity to distribute data and two sets of parity information across four or more disks. It can tolerate the failure of any two drives without losing data, as long as the other drives can reconstruct the data from the double parity information.
NEW QUESTION # 14
You need a tool on a SAN Fabric that Will deliver protocol diagnostic, fabric configuration validation With SPOCK, and assess the health of physical ports with self-healing and fabric monitoring.
It must perform end-to-end diagnostics while using predefined templates to reduce configuration errors.
Which diagnostic tool should be used?
- A. On-Line Diagnostics
- B. Off-Line Diagnostics
- C. HPE InfoSight
- D. Network Orchestrator
Answer: C
Explanation:
Explanation
According to the HPE website, HPE InfoSight is a cloud-based AI platform that delivers global visibility and insights into the health, performance, and capacity of your HPE storage and servers. It can also provide protocol diagnostics, configuration validation with SPOCK, and assess the health of physical ports with self-healing and fabric monitoring1. It can also perform end-to-end diagnostics while using predefined templates to reduce configuration errors1
NEW QUESTION # 15
your customer has standardized on the AMD platform and asks tor a new I IJ server.
Which server should you recommend?
- A. DL385
- B. DL560
- C. DL360
- D. DL365
Answer: A
Explanation:
Explanation
According to HPE, this server offers the 2nd generation AMD EPYC 7000 Series processor delivering up to
2X the performance of the prior generation1. It also provides built-in security and flexibility for key applications such as virtualization, software-defined storage (SDS), and High-Performance Compute (HPC)1.
NEW QUESTION # 16
A customer needs Help setting up their bootable logical drive/volume, checking online drive firmware activation readiness, and managing device identification LEDS What HPE tool should you recommend?
- A. Service pack for ProLiant
- B. smart storage Administrator
- C. Integrated Smart Update Tool
- D. HPE OneView
Answer: B
Explanation:
Explanation
the HPE Smart Storage Administrator (SSA) is a web-based application that helps you configure, manage, diagnose, and monitor HPE ProLiant Smart Array Controllers and now other storage devices as well, such as host bus adapters (HBAs), HPE Storage controllers, and future devices such as SCSI Express drives, and SAS switch devices.
Some of the features of the HPE SSA include:
* Creating a bootable logical drive
* Checking online drive firmware activation readiness
* Managing device identification LEDs
* Configuring drive erase
* Creating and managing arrays and logical drives
* Viewing controller and drive status and health information
* Updating controller firmware
NEW QUESTION # 17
Match the correct scaling approach to each strategy
Answer:
Explanation:
Explanation
* Scale-out: Add more servers to do the workload
* Scale-up: Add more resources (such as processors and memory) to existing servers
* Scale-out: Add an additional two-socket system to an existing VMware Cluster
* Scale-up: Add two additional processors to a four-socket system currently equipped with only two processors This is because:
* Scale-out: This is a scaling approach that involves adding more servers or nodes to a system to increase its capacity and performance. It is also known as horizontal scaling. It can help distribute the workload across multiple servers and improve availability and fault tolerance.
* Scale-up: This is a scaling approach that involves adding more resources (such as processors, memory, storage or network) to an existing server or node to increase its capacity and performance. It is also
* known as vertical scaling. It can help improve the performance of a single server and reduce the complexity of managing multiple servers.
NEW QUESTION # 18
You need a tool on a SAN Fabric that Will deliver protocol diagnostic, fabric configuration validation With SPOCK, and assess the health of physical ports with self-healing and fabric monitoring.
It must perform end-to-end diagnostics while using predefined templates to reduce configuration errors.
Which diagnostic tool should be used?
- A. On-Line Diagnostics
- B. Off-Line Diagnostics
- C. HPE InfoSight
- D. Network Orchestrator
Answer: C
Explanation:
Explanation
According to the HPE website, HPE InfoSight is a cloud-based AI platform that delivers global visibility and insights into the health, performance, and capacity of your HPE storage and servers. It can also provide protocol diagnostics, configuration validation with SPOCK, and assess the health of physical ports with self-healing and fabric monitoring1. It can also perform end-to-end diagnostics while using predefined templates to reduce configuration errors1
NEW QUESTION # 19
A customer with a new HPE MSA 2060 Gen6 array wants to ensure that best practices were followed when they installed and set it up.
Which HPE product will meet the customer requirements?
- A. HPE SMU v4 Health check
- B. HPE OneView Standard
- C. HPE InfoSight
- D. HPE MSA Health Check Tool
Answer: D
Explanation:
Explanation
HPE MSA Health Check Tool is a web-based tool that provides a comprehensive health check of an HPE MSA 1060/2060/2062 storage array. The tool analyzes the array configuration, performance, and logs and provides a detailed report with recommendations based on HPE best practices. The tool can also generate a support ticket if any issues are detected.
The HPE MSA Health Check Tool is available for download from the HPE Support Center website1. The tool requires an active warranty or support contract for the array.
NEW QUESTION # 20
Match each HPE product With the customer requirements it meets.
Answer:
Explanation:
Explanation
* MSA 2062: A customer needs a low cost entry-level storage appliance with automatic tiering for their Fibre Channel environment
* MSL2024: A hospital wants to store air-gapped copies of their medical imaging to protect against ransomware attacks and natural disasters
* StoreEasy 1560: A small software development company needs a solution for their growing file shares in their Microsoft environment
* StoreOnce VSA: Customer wants to backup and quickly recover their Hyper-V environment in a remote
* site with an option to backup to the cloud
This is because:
* MSA 2062: This is a flash-enabled storage appliance that supports Fibre Channel, iSCSI and SAS connectivity. It offers automatic tiering that optimizes performance and cost by moving data between SSDs and HDDs based on usage patterns.
* MSL2024: This is a tape library that supports up to 24 LTO tape cartridges and one or two tape drives. It provides offline data protection and long-term retention for compliance and disaster recovery purposes.
It can also create air-gapped copies of data that are isolated from network threats such as ransomware.
* StoreEasy 1560: This is a file storage appliance that supports SMB, NFS and FTP protocols. It is optimized for Microsoft environments and integrates with Active Directory, BitLocker encryption, Windows Storage Server and Windows Server Backup. It can scale up to 16 TB of internal capacity and
280 TB of external capacity.
* StoreOnce VSA: This is a virtual storage appliance that provides backup and recovery for virtualized environments. It supports Hyper-V, VMware and KVM hypervisors and integrates with backup applications such as HPE Data Protector and Veeam. It can also deduplicate data and replicate it to another StoreOnce system or to the cloud.
NEW QUESTION # 21
Which new feature is provided by the Storage Management utility v4?
- A. automatic installation of new recommended firmware versions
- B. autonomic
- C. easy switching of active firmware versions
- D. automatic file classification
Answer: C
Explanation:
Explanation
one of the topics covered in the module 4 of the Implementing HPE MSA Storage Solutions course is
"Explain the firmware update process on MSA". This suggests that the firmware update is a maintenance task that can be performed with the Storage Management utility v4.
NEW QUESTION # 22
A customer needs an open-source container orchestration system that supports cloud-native applications area provides support for containers with persistent storage at the same time.
Which platform should you recommend?
- A. Kubernetes
- B. openstack Neutron
- C. Hortonworks Data Platform
- D. Hadoop
Answer: A
Explanation:
Explanation
Kubernetes is an open-source system for automating deployment, scaling, and management of containerized applications. It groups containers that make up an application into logical units for easy management and discovery. Kubernetes supports cloud-native applications that are designed to run on distributed and dynamic environments.
Kubernetes also supports containers with persistent storage by providing various options such as:
* Persistent Volumes: These are abstracted storage resources that can be provisioned by administrators and consumed by users without worrying about the underlying storage implementation.
* Persistent Volume Claims: These are requests for storage by users that can be dynamically or statically bound to Persistent Volumes.
* Storage Classes: These are ways to describe different kinds of storage offered by a cluster, such as SSD or HDD, performance or capacity, etc.
* Volume Snapshots: These are point-in-time copies of Persistent Volumes that can be used for backup or restoration purposes.
* Container Storage Interface: This is a standard interface that allows Kubernetes to communicate with various storage vendors and plugins.
NEW QUESTION # 23
your customer wants to purchase a new HPE MSA controller enclosure fully populated With SSD fives. They have four existing expansion enclosures from their previous solution that they want to connect to the new controller.
Two expansion enclosures are fully populated with SFF disks, and the other two are populated with LFF drives.
which storage controller enclosure solution should you recommend?
- A. HPE MSA 1060
- B. HPF MSA 2060 with Advanced Data service (ADS) suite LTU
- C. HPE MSA 2060
- D. HPF MSA 1060 with Advanced Data Service (ADS) suite LTLJ
Answer: B
Explanation:
Explanation
HPE MSA 2060 Storage solution supports a mixture of 3.5 inch LFF and 2.5 inch SFF expansion enclosures for a maximum of 9 enclosures (10 total including the array). This means that it can accommodate the four existing expansion enclosures from the previous solution that have different disk sizes.
The HPE MSA 2060 also delivers up to 395,000 IOPS, which is up to 80% faster than its prior generation1.
This would be beneficial for a customer who wants to fully populate the controller enclosure with SSD drives, which are faster than HDD drives.
The Advanced Data service (ADS) suite LTU is a license that enables features such as snapshot, replication, performance tiering, virtual disk groups, and thin provisioning on the HPE MSA 20602. These features can enhance the performance, availability, and efficiency of the storage system.
NEW QUESTION # 24
You are explaining hardware health monitoring features Of an HPE ProLiant DL380 Geno Plus server. you need to snow how historical events can be viewed, including fan and power supply failures.
Where can this information be found?
- A. Integrated Management Log
- B. Data Services Cloud Console
- C. HPE Data Ops Manager
- D. ILO Event
Answer: A
Explanation:
Explanation
Integrated Management Log (IML) is a feature that records hardware events such as fan and power supply failures on HPE ProLiant servers. The IML can be viewed through various methods, such as the iLO web interface, the iLO RESTful API, or the Smart Storage Administrator (SSA). The IML provides historical information about the server's hardware health and helps with troubleshooting and analysis.
NEW QUESTION # 25
What does an SSD wear Gauge define?
- A. Type of interface used for the SSD drive
- B. Remaining lifetime for the SSD drive
- C. Maximum speed of the SSD drive
- D. Type of technology used within the SSD drive
Answer: B
Explanation:
Explanation
According to HPE, SmartSSD Wear Gauge is a feature that provides an estimate of the remaining useful life of an SSD drive based on its usage patterns . It can help you monitor the health and performance of your SSD drives and plan for replacement or upgrade when needed
NEW QUESTION # 26
Your customer has several HPE Nimble Adaptive Flash arrays deployed in the field that are aging and need a refresh. You need to gather information to correctly size the new storage arrays. The information must include the storage IOPS, throughput, latency, storage growth, and data efficiency.
What tool should you use to perform this task without deploying any software on the existing environment?
- A. HPE Assessment Foundry
- B. HPE InfoSight
- C. HPE CloudPhysics
- D. HPE OneView
Answer: B
NEW QUESTION # 27
What benefit does using HPE GreenLake central provide for customers?
- A. It provides aggregated usage across on-premises and cloud deployments in AWS and Microsoft Azure.
- B. It can run real-time assessments and offer insights about potential exposure to failures and external attacks.
- C. It provides One-Click provisioning through a pre-packaged application store with curated, prebuilt images for a wide range of applications.
- D. It can analyze different workloads the customer is running and provide guidance on the best server for the workload.
Answer: A
Explanation:
Explanation
This is because HPE GreenLake Central is an online portal that enables customers to manage and optimize their hybrid cloud environments. It provides a unified view of the costs, capacity, consumption and compliance of their on-premises GreenLake systems and their public cloud platforms such as AWS and Azure. It also offers insights and recommendations to help customers improve their IT performance, ROI and data protection.123
NEW QUESTION # 28
You are considering requirements for a database server.
What is the most important component to employ?
- A. Fault-tolerant memory
- B. Antivirus Software
- C. GPU accelerators
- D. File and Print software
Answer: A
Explanation:
Explanation
According to Database Design Resource, fault-tolerant memory is a type of memory that can detect and correct errors without affecting the performance or availability of the database server1. Fault-tolerant memory can help prevent data corruption and loss, which are critical issues for database servers1.
NEW QUESTION # 29
Your customer asks you to explain the benefits that the HPE GreenLake consumption model can provide.
Match the GreenLake benefits to their outcomes.
Answer:
Explanation:
* Managed by HPE and HPE Partners: Allows customer IT employees to be more productive within an organization
* Pay-per-use: Provides financial flexibility for customers, frees up capital, and provides better control costs
* Scale up and down: Manages capacity ahead of demand and allows customers to easily add resources when they are needed
* Self-service: Provides customers with a simple point-and-click automated provisioning
* https://www.hpe.com/psnow/doc/a00029675enw?jumpid=in_lit-psnow-red
* https://www.techtarget.com/searchdatacenter/feature/What-is-HPE-GreenLake-and-how-does-it-work
* https://www.turn-keytechnologies.com/blog/article/how-hpe-greenlakes-consumption-model-is-transformi
NEW QUESTION # 30
Match the protocol to a fundamental approach for storing data. (Each option may be used once, more than once, or not at all.)
Answer:
Explanation:
Explanation
* NAS: c) Sharing files over industry standard protocols such as NFSv4 or SMB.
* SAN: a) Block access using a FC protocol. or b) Block access using FCoE protocol or d) Block access using the iSCSI protocol.
According to the HPE website, NAS stands for Network Attached Storage and is a storage system that provides file-level access to data over a network. NAS devices use protocols such as NFSv4 or SMB to share files with clients. NAS devices typically have their own file system and operating system and can support multiple users and applications.
SAN stands for Storage Area Network and is a network that provides block-level access to data over a dedicated network. SAN devices use protocols such as FC, FCoE, or iSCSI to transfer blocks of data to servers. SAN devices do not have their own file system and rely on the servers to manage the data. SAN devices typically provide high performance and availability for mission-critical applications.
NEW QUESTION # 31
Map the HPE platform and workload-oriented solutions with the customer's challenge.
Answer:
Explanation:
Explanation
Containers solutions -> Simplify acquisition and deployment of complex systems1 Data Management and Analytics solutions -> Accelerate time to value from insights2 Hybrid Cloud solutions -> Unify operations and management3 Transcoding & Visualization solutions -> Provide stability to scale anywhere VDI solutions -> Improve user experience while managing costs
NEW QUESTION # 32
A customer wants to create a 3TB boot partition on their HPE Pt0Ljant DL360 Gen10 Plus server.
What setting must De enabled to allow this configuration?
- A. Legacy BIOS Boot Mode
- B. Secure Boot
- C. unlimited Extensible Firmware Interface (UEFI) Boot Mode
- D. Virtuaulization-Maxjmum pertormance
Answer: C
Explanation:
Explanation
setting that must be enabled to allow a 3TB boot partition on their HPE ProLiant DL360 Gen10 Plus server is B. Unified Extensible Firmware Interface (UEFI) Boot Mode. This is because UEFI Boot Mode supports booting from disks larger than 2.2 TB by using the GUID Partition Table (GPT) format. GPT allows for partitions of up to 9.4 ZB (9.4 x 10^21 bytes) in size.12
NEW QUESTION # 33
your customer runs a small datacenter ana their storage requirements change on a month-to-month basis. They want to easily monitor their Cloud costs/usage and grow their resources.
Which self-service platform will fill their requirements?
- A. HPE Compute Ops Management
- B. HPE GreenLake Data Services Cloud Console
- C. HPE GreenLake central
- D. HPE InfoSight
Answer: C
Explanation:
Explanation
HPE GreenLake Central is a self-service platform that gives customers a consistent cloud experience for all their applications and data, across edges, colocations, and data centers. Some of the features of HPE GreenLake Central include:
* Easily monitor cloud costs and usage: HPE GreenLake Central provides customers with visibility and control over their cloud spending and consumption across hybrid environments. Customers can view their usage and costs by service, location, application, or business unit. They can also set budgets, alerts, and policies to optimize their cloud resources and expenses.
* Grow resources as needed: HPE GreenLake Central enables customers to scale up or down their cloud services and resources as their business needs change. Customers can access a catalog of cloud services from HPE and partners through a self-service portal and order them with a few clicks. They can also leverage buffer capacity that is ready to use in minutes, not months.
NEW QUESTION # 34
your customer is using HPE Infosight in their environment containing ProLiant and MSA systems.
which product supports automatic case creation through InfoSight?
- A. MSA 2062
- B. proLiant DL560 Gen10
- C. MSA2040
- D. ProLiant DL120 G7
Answer: B
Explanation:
Explanation
According to the HPE website, HPE InfoSight supports automatic case creation for HPE ProLiant servers that are connected to HPE InfoSight through HPE Integrated Lights-Out (iLO) Amplifier Pack1. The ProLiant DL560 Gen10 is one of the supported servers that can benefit from this feature
NEW QUESTION # 35
your customer needs to capture, store, manage, and analyze a dataset that exceeds capacity of typical database software tools.
What storage technology should you propose to meet their needs?
- A. Containers
- B. Block Storage
- C. File Storage
- D. Big Data
Answer: D
Explanation:
Explanation
According to Simplilearn, big data storage is a new technology that allows you to store large amounts of data that exceed the capacity of typical database software tools1. Big data storage can handle various types of data, such as structured, unstructured, or semi-structured data, and provide fast and scalable access to it1.
NEW QUESTION # 36
Review the Exhibit:
Match the definition to each colored boxed acronym from the image.
Answer:
Explanation:
Explanation
p: Class of Raid Controller
4: Number of SAS lanes
16: Smart Array Series
ie: Port Type
m: Controller Type (form factor)
HPE Smart Array P416ie-m SR Gen10 Controller is a flexible Smart Array controller that provides enterprise-class storage performance, increased internal scalability with SAS Expander Card, and data protection for HPE Synergy Compute Modules. The controller has these features:
* p: The P stands for Performance class, which indicates that the controller has high performance and reliability for demanding workloads.
* 4: The 4 indicates that the controller has four SAS lanes per port, which means that it can support up to four SAS devices per port.
* 16: The 16 indicates that the controller belongs to the 16th generation of Smart Array controllers, which offer enhanced security, performance, and manageability.
* ie: The ie stands for internal/external, which means that the controller has both internal and external ports. The internal ports connect to the drives inside the compute module, while the external ports connect to the SAS Expander Card or external storage devices.
* m: The m stands for mezzanine, which means that the controller is a mezzanine card that plugs into a dedicated slot on the compute module.
NEW QUESTION # 37
......
Validate your HPE0-V26 Exam Preparation with HPE0-V26 Practice Test: https://easytest.exams4collection.com/HPE0-V26-latest-braindumps.html
