Certification Training for FCP_FAZ_AD-7.4 Exam Dumps Test Engine [2025]
Nov 22, 2025 Step by Step Guide to Prepare for FCP_FAZ_AD-7.4 Exam
Fortinet FCP_FAZ_AD-7.4 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
NEW QUESTION # 105
A play book contains five tasks in total. An administrator executed the playbook and four out of five tasks finished successfully, but one task failed. What will be the status of the playbook after its execution?
- A. Running
- B. Failed
- C. Success
- D. Upstream_failed
Answer: B
Explanation:
Playbook jobs that include one or more failed tasks are labeled as Failed in Playbook Monitor.
FortiAnalyzer_7.0_Study Guide page No: 247
Playbook jobs that include one or more failed tasks are labeled as Failed in Playbook Monitor. A failed status, however, does not mean that all tasks failed. Some individual actions may have been completed successfully.
NEW QUESTION # 106
What is the best approach to handle a hard disk failure on a FortiAnalyzer that supports hardware RAID?
- A. Run execute format disk to format and restart the FortiAnalyzer device.
- B. Shut down FortiAnalyzer and replace the disk.
- C. Perform a hot swap of the disk.
- D. There is no need to do anything because the disk will self-recover.
Answer: C
Explanation:
In a hardware RAID setup, FortiAnalyzer supports hot swapping, which allows you to replace a failed disk without shutting down the device. The RAID controller will automatically rebuild the array using the new disk, minimizing downtime and maintaining data integrity.
NEW QUESTION # 107
Which statement correctly describes RAID 10 (1+0) on FortiAnalyzer?
- A. 11 combines mirroring striping and distributed parity to provide performance and fault tolerance
- B. A configuration with four disks, each with 2 TB of capacity, provides a total space of 4 TB.
- C. It uses striping to provide performance and fault tolerance.
- D. A configuration with four disks, each with 2 TB of capacity, provides a total space of 2 TB.
Answer: B
Explanation:
RAID 10 combines mirroring (RAID 1) and striping (RAID 0). In a RAID 10 setup with four disks, data is mirrored across two pairs of disks, and those pairs are striped for performance. This results in improved performance and fault tolerance, but the total usable storage is 50% of the total raw storage, meaning four 2 TB disks provide 4 TB of usable space.
NEW QUESTION # 108
Which fact must you consider after you enable auto-cache for reports?
- A. You must rebuild the SQL database for the change to take effect.
- B. Larger reports may consume excessive system resources.
- C. Generating multiple reports simultaneously may cause data corruption.
- D. You must choose a report type that supports this feature.
Answer: B
NEW QUESTION # 109
When you perform a system backup, what does the backup configuration contain? (Choose two.)
- A. Generated reports
- B. Authorized devices logs
- C. Device list
- D. System information
Answer: C,D
Explanation:
https://help.fortinet.com/fa/cli-olh/5-6-5/Content/Document/1400_execute/backup.htm Reference: https://help.fortinet.com/fauth/5-2/Content/Admin%20Guides/5_2%20Admin%20Guide/300
/301_Dashboard.htm
NEW QUESTION # 110
View the exhibit:
What does the 1000MB maximum for disk utilization refer to?
- A. The disk quota for all devices in the ADOM
- B. The disk quota for the FortiAnalyzer model
- C. The disk quota for each device in the ADOM
- D. The disk quota for the ADOM type
Answer: A
Explanation:
https://docs.fortinet.com/document/fortianalyzer/6.2.0/administration-guide/743670/configuring-log-storage- policy
NEW QUESTION # 111
What are two effects of enabling auto-cache in a FortiAnalyzer report? (Choose two.)
- A. FortiAnalyzer local cache is used to store generated reports.
- B. When new logs are received, the hard-cache data is updated automatically.
- C. The size of newly generated reports is optimized to conserve disk space.
- D. The generation time for reports is decreased.
Answer: B,D
NEW QUESTION # 112
Refer to the exhibit.
What is the purpose of using the Chart Builder feature on FortiAnalyzer?
- A. You can add charts to generated reports using this feature.
- B. This feature allows you to build a chart under FortiView.
- C. In Log View, this feature allows you to build a dataset and chart automatically, based on the filtered search results.
- D. In Log View, this feature allows you to build a chart and chart automatically, on the top 100 log entries.
Answer: C
NEW QUESTION # 113
What must you configure on FortiAnalyzer to upload a FortiAnalyzer report to a supported external server?
(Choose two.)
- A. SFTP, FTP, or SCP server
- B. Report scheduling
- C. Mail server
- D. Output profile
Answer: A,D
Explanation:
https://docs.fortinet.com/document/fortianalyzer/6.0.2/administration-guide/598322/creating-output-profiles
NEW QUESTION # 114
What is the purpose of employing RAID with FortiAnalyzer?
- A. To separate analytical and archive data
- B. To introduce redundancy to your log data
- C. To provide data separation between ADOMs
- D. To back up your logs
Answer: B
Explanation:
https://en.wikipedia.org/wiki/RAID#:~:text=RAID%20(%22Redundant%20Array%20of%20Inexpensive,%
2C%20performance%20improvement%2C%20or%20both.
NEW QUESTION # 115
How are logs forwarded when FortiAnalyzer is using aggregation mode?
- A. Logs and content files are forwarded as they are received.
- B. Logs and content files are stored and uploaded at a scheduled time.
- C. Logs are forwarded as they are received and content files are uploaded at a scheduled time.
- D. Logs are forwarded as they are received.
Answer: B
Explanation:
https://www.fortinetguru.com/2020/07/log-forwarding-fortianalyzer-fortios-6-2-3/
https://docs.fortinet.com/document/fortianalyzer/6.2.0/administration-guide/420493/modes
NEW QUESTION # 116
Which two of the following must you configure on FortiAnalyzer to email a FortiAnalyzer report externally?
(Choose two.)
- A. SFTP server
- B. Report scheduling
- C. Mail server
- D. Output profile
Answer: C,D
Explanation:
Reference: https://docs.fortinet.com/document/fortianalyzer/6.0.2/administration-guide/598322/creating- output-profiles
NEW QUESTION # 117
View the exhibit.
Why is the total quota less than the total system storage?
- A. Some space is reserved for system use, such as storage of compression files, upload files, and temporary report files
- B. The oftpd process has not archived the logs yet
- C. 3.6% of the system storage is already being used.
- D. The logfiled process is just estimating the total quota
Answer: A
Explanation:
https://docs.fortinet.com/document/fortianalyzer/6.2.5/administration-guide/368682/disk-space-allocation
NEW QUESTION # 118
Refer to the exhibit.
What does the data point at 12:20 indicate?
- A. The sqlplugind service is caught up with new logs.
- B. FortiAnalyzer is using its cache to avoid dropping logs.
- C. The log insert lag time is increasing.
- D. The performance of FortiAnalyzer is below the baseline.
Answer: A
NEW QUESTION # 119
What statements are true regarding disk log quota? (Choose two)
- A. The FortiAnalyzer automatically sets the disk log quota based on the device.
- B. The FortiAnalyzer can overwrite the oldest logs or stop logging once the disk log quota is met.
- C. The FortiAnalyzer stops logging once the disk log quota is met.
- D. The FortiAnalyzer disk log quota is configurable, but has a minimum o 100mb a maximum based on the reserved system space.
Answer: B,D
NEW QUESTION # 120
Refer to the exhibit.
What is the purpose of configuring FortiAnalyzer with the settings displayed in the image?
- A. To maximize resiliency
- B. To expand bandwidth
- C. To improve security
- D. To increase reliability
Answer: C
Explanation:
The settings displayed in the image show the creation of a VLAN interface on FortiAnalyzer. The VLAN ID is set to 100, and it is associated with port 5.
The purpose of configuring a VLAN interface like this is generally: To improve security.
By creating a VLAN, traffic can be segmented into isolated networks, which helps limit access and enhances security by reducing the broadcast domain and keeping different types of traffic (e.g., management, user, and data traffic) separate.
NEW QUESTION # 121
Which process is responsible for enforcing the log file size?
- A. logfiled
- B. oftpd
- C. miglogd
- D. sqlplugind
Answer: A
Explanation:
The logfiled process is responsible for enforcing log file size and managing log rotation on FortiAnalyzer. It ensures that log files do not exceed the configured size limits and handles the creation and rotation of new log files when necessary.
NEW QUESTION # 122
What purposes does the auto-cache setting on reports serve? (Choose two.)
- A. To automatically update the hcache when new logs arrive
- B. To reduce the log insert lag rate
- C. To reduce report generation time
- D. To provide diagnostics on report generation time
Answer: A,C
NEW QUESTION # 123
What can you do on FortiAnalyzer to restrict administrative access from specific locations?
- A. Configure trusted hosts for that administrator.
- B. Enable geo-location services on accessible interface.
- C. Configure an ADOM for respective location.
- D. Configure two-factor authentication with a remote RADIUS server.
Answer: A
Explanation:
Reference: https://docs.fortinet.com/document/fortigate/6.2.0/hardening-your-fortigate/582009/system- administrator-best-practices
NEW QUESTION # 124
Which two settings must you configure on FortiAnalyzer to allow non-local administrators to authenticate on FortiAnalyzer with any user account in a single LDAP group? (Choose two.)
- A. An administrator group
- B. One or more remote LDAP servers
- C. A local wildcard administrator account
- D. LDAP servers IP addresses added as trusted hosts
Answer: B,C
Explanation:
A wildcard administrator account allows any user from the specified LDAP group to authenticate, and the remote LDAP servers must be configured to validate those user credentials. The combination of these settings enables authentication via LDAP for non-local users.
NEW QUESTION # 125
By default, what happens when a log file reaches its maximum file size?
- A. FortiAnalyzer forwards logs to syslog.
- B. FortiAnalyzer rolls the active log by renaming the file.
- C. FortiAnalyzer stops logging.
- D. FortiAnalyzer overwrites the log files.
Answer: B
NEW QUESTION # 126
......
Ultimate Guide to Prepare FCP_FAZ_AD-7.4 Certification Exam for Fortinet Network Security Expert: https://easytest.exams4collection.com/FCP_FAZ_AD-7.4-latest-braindumps.html
